Teac Reference 600 With Wharfedale 10.4 Floorstanding Speakers

Teac Reference 600 CD Amplifier And Tuner DAB/FM/AM/Internet Radio With Wharfedale 10.4 Floorstanding Speakers

Free 6m length of Chord CarnivalSpeaker Cable, Free 1m Chord Crimson Interconnect

AG-H600DNT amplifier specifications

DAB/AM/FM/Internet-Radio Stereo Receiver

Output Power: 75W + 75W (8 ohms, 1kHz, 0.5%THD)

90W + 90W (4 ohms, 1kHz, JEITA)

Total Harmonic Distortion: 0.05% (8 ohms, 1kHz, 40W)

Signal-to-Noise Ratio: 70dB (Phono)

100dB (CD, AUX)

110dB (Tone Direct)

Input Sensitivity: 2.8mV, 47k ohms (Phono-MM)

180mV, 47k ohms (CD, AUX)

Frequency Response: 10Hz - 65,000Hz (8 ohms, -3dB, 1W)

Tone Control: Bass ±12dB (at 100Hz)

Mid ±12dB (at 1kHz)

Treble ±12dB (at 10kHz)

Tuner: DAB, DAB+ (Band-III, 174MHz - 240MHz)

AM (522kHz - 1620kHz)

FM (87.50MHz - 108.00MHz, 50kHz steps)

Internet-Radio (MP3, WMA, RealAudio)

Number of Preset: 30 AM, 30 FM, 10 DAB

Network: Ethernet (10Base-T, RJ-45)

Wireless LAN (IEEE802.11b/g)

Security (WEP, WPA, WPA2)

Audio Input: 4 (Phono, CD, AUX, iPod)

Audio Output: 1 (Line)

Speaker Terminals: Binding-post x 2 pairs

Headphone: 6.3mm Stereo

Display: Fluorescent Dot-matrix

Display Dimmer: Yes (Normal, Dimmed, Off)

Power Requirements: 230V, 50Hz (UK/EUR)

Consumption Power: 50W (Standby: 0.7W)

Dimension (W x H x D) 290 x 102 x 320mm

Weight: 6.8kg

Accessories: System Remote Control, AAA Batteries x 2

AM Loop Antenna, FM Lead-type Antenna

DAB Antenna, Wireless LAN Antenna

Power Cord, Owner’s Manual, Warranty Card

Option: Docking Station for iPod (DS-20, Sold separately)

PD-H600 CD Player specifications

Compatible Discs: CD-DA, CD-R/RW, MP3, WMA

Frequency Response: 20Hz - 20,000Hz (±0.5dB)

Total Harmonic Distortion: Less than 0.003% (1kHz)

Signal-to-Noise Ratio: more than 110dB (1kHz, 0dB, A weight)

D/A Converter: 24bit/192kHz Delta-sigma (PCM1796)

Oversampling Rate: 8-times

Repeat Play Yes (1, All)

Shuffle Play: Yes

Programme Play: Yes (30 Tracks)

Display: Fluorescent Dot-matrix

Display Dimmer: Yes (Normal, Dimmed, Off)

Audio Output: 1 RCA (Gold-plated, 2.0Vrms, 1kHz, 0dB)

Digital Output: 1 Coaxial (Gold-plated, 0.5V, 75 ohms)

Signal Ground Terminal: 1

Power Requirements: 230V, 50Hz (UK/EUR)

Consumption Power: 9W (Standby: 0.7W)

Dimension (W x H x D) 290 x 102 x 308mm

Weight: 5.4kg

Accessories: System Remote Control, AAA Batteries x 2

RCA Cable, Power Cord, System Cable

Owner’s Manual, Warranty Card

Wharfedale 10.4 Floor Standing Speakers

Technology

Stronger cabinet walls:

The concept of curved cabinet walls, for strength and the reduction of internal standing waves, has been retained from the Diamond 9 Series. However, these walls have been made stronger through a superior method of bonding and curving the panels, increasing rigidity and, aided by internal bracing, reducing the audible effects of panel resonance.

Composite front baffle panel:

The front baffle features a composite panel structure with a piano-black finish. This contributes to the speaker’s smart new look and, more importantly, to its improved sound quality, as it reduces the effects of vibration and provides a stable platform for the drive units.

Improvements to the mid/bass drive unit:

To make the most of the stronger cabinet, the main drive unit chassis has been enhanced with a massive flange that is secured using six screws, thus improving its stability. A diamond pattern has also been moulded into the surround of the Kevlar cone; this is more than just cosmetic as the pattern reduces and damps standing waves in the surround, yielding a cleaner high-frequency acoustic roll-off and enhancing the ability of the mid/bass unit and tweeter to work as a cohesive whole.

Rear-firing twin reflex ports:

The speaker’s twin reflex ports have been moved to the rear of the cabinet, to reduce the effects of audible distortion. These ports extend the bass to below 45Hz, contributing to an impressive sense of sonic scale.

Tweeter diffuser:

Over the soft-dome tweeter is a metal diffusion grid which, as well as protecting the dome when the speaker is being used without its grille, also irons out high-frequency perturbations right up to 30kHz, delivering a smoother response and crystal-clear treble detailing.

Enhanced front grille with ‘invisible’ fixing:

The front grille has been improved to ensure it has no adverse effect on the speaker’s performance. In addition, it is now affixed without pegs, therefore eschewing the need for unsightly holes in the piano-black finish front baffle.

Low Profile Chassis:

The open nature of the chassis reduces reflection from rear cone movements, allowing air to move freely through the driver, which in turn results to an overall even response with a much lower distortion. Formed from a high density, injection-moulded polymer pioneered by Wharfedale, the chassis itself provides substantial damping of ring waves.

Neodymium-Powered Tweeter Mounted in Cast Alloy Surround:

With the use of neodymium, the strongest of ‘rare earth’ materials, a concentration of the magnetic field is directed within the area of voice coil excursion. The cast alloy mounting plate has a profiled cross-section to optimize the dispersion of high frequency sound so it integrates flawlessly with the bass/mid-range drivers and produces a fast and more linear response possible.

Blended SRBP Cone Surrounds:

The new textured surround allows a large ‘vMax’ apart from providing a compliant driver gasket, which dramatically improved dynamic response. The diamond profiled surround features rim-edge stiffeners which effectively damp cone resonances.

Offset Bi-Wire Terminals:

Utilizing the same familiar offset terminal block as with its predecessors, the gold-plated contact areas and bridging strips allow firm connections with the best possible connectivity, whilst the offset pattern provides allowance for heavy duty cables and a wider range of cable connection options.

Specifications

Format Floorspeaker

Bass Driver 125mm

Bass/Mid Driver 125mm

Tweeter 25mm

Suitable Amplifier Power 20 - 120w

Nominal Impedance 6 Ω

A/V Shielded no

Sensitivity (1W @ 1M) 88 dB

Nominal Frequency Range 38-24kHz

HF Limit (-10dB) 44kHz

Freq. Fb 40Hz

Dimensions (mm)(H*W*D) 850*194*278

Crossover Frequency 140Hz / 3.8kHz

Height on spikes/feet (mm) 905