Roksan Kandy K2 CD And Amplifier With Roksan K2 Speakers

Roksan Kandy K2 CD And Amplifier Combination with award winning roksan k2 speakers

Roksan Kandy K2 Integrated Amplifier

Kandy K2 integrated is designed and refined to what would be expected of amplifiers

classified as hi-end and costing twice its price. The new K2 sounds far more accurate,

more delicate and even more powerful than its award winning predecessor the Kandy

L.III. True dynamics and musical capabilities of the K2 enhance the enjoyment and

provide insight to all types of music. The sound stage and musicians have the realistic

‘sound’ and ‘air’ about them that is achieved by the highest class amplifiers around.

Thanks to its superior design and use of highest quality components, the K2 sets a

new standard for true hi-end entry level amplification.

The new Kandy K2 integrated benefits from totally revised amplifier internals. The

mains transformer and amplifier’s 3 AC/DC circuitry are now separated and moved to

two sides away from the pre and amplifier main circuits thus dramatically reducing

noise interference. After rectification circuitry, the power supply layout, distribution and

tracking to different sections of the amplifier have been optimised and internal wiring

minimised to ensure all sections work at their best.

Features:

New look chassis, front panel and display

New one piece Main amplifier PCB

New improved high quality signal input relays

Optimised volume control position on main amplifier PCB

New optimised one piece display PCB with headphone output socket

Symmetrical amplifier layout

Optimised power supply layout, distribution and decoupling

Improved decoupling and power regulation to all stages

Improved power supply and grounding for Preamplifier and phono section

New Op-amps, audio and power supply circuits and layouts

Directly powered power amp section from the main power supply

Optimised routing and no internal low level signal cables

New switch-able Bypass input

Improved wideband noise rejection

Redesigned chassis and cover with improved ventilation

New custom made, programmable learning system remote handset with back light

specifications

Inputs Line Level (x5), Moving Magnet (x1), Tape (x1), Bypass (x1)

Input Impedance 47 kΩ

Input Sensitivity (120W) Line 470mV

Outputs Speaker L & R (x1), Preamplifier (x1), Tape (x1), Headphone (x1)

Output Power >125 Watts, into 8Ω

both channels driven

>190 Watts, into 4Ω

both channels driven

Power Supply 500VA Ultra Low Noise Toroidal Transformer

4 Regulated Supply Rails

Damping Factor >110 (8Ω)

Frequency response (-3dB), <3Hz – >100kHz

Gain 37.3dB Overall (Pre & Power)

5.7dB Preamplifier

31.6dB Power Amplifier

Harmonic Distortion <0.005% 1kHz - 8Ω

Signal to Noise Ratio Line 100dBa (ref 470mV)

Power Source 100V – 120V 50Hz / 60Hz

220V – 240V 50Hz / 60Hz

Power Consumption Standby <25W, Full Power 2-CH 8Ω < 330 W, 4Ω <550W

Dimension 432 x 380 x 90 (W x D x H) mm

432 x 380 x 102 (including feet)

Weigth 14 Kg

Roksan Kandy K2 CD Player

Kandy K2 CD player is designed and refined to bring joy to even the most discerning

listeners. It will compliment any hi-end amplifier with a performance expected only

from true hi-end CD players. The new K2 sounds far more detailed, more delicate

with even more vigour than its 5 star winning predecessor the Kandy L.III. Life like

dynamics and musical capabilities of the K2 can now provide enjoyment and insight to

all types of music. The sound stage and musicians have realistic ‘sound’ and ‘air’

about them providing separation and timing between the musicians that is achieved

by the highest class CD players around. Thanks to its superior design and use of

highest quality components, the K2 sets a new standard for true hi-end entry level CD

replay.

The new Kandy K2 CD benefits from totally revised internals. The DAC section is now

moved closer to the control section with improved circuitry and clocking system. The

CD drive and data acquisition is improved to ensure the music replay is absolutely

first class. Optimised control and DAC circuitry combined with careful power supply

and regulation ensures signal integrity with minimal noise interference. This combined

with the new D/A converter dig deep into the lowest levels of detail that add to the

overal musical experience.

Features:

New look chassis, front panel and display

New one piece control and DAC PCB

New D/A IC (PCM1798 Advance segment stereo audio DAC 24 bit, 192 kHz)

Super precision, stable custom made Master Clock Crystal

110 Ohm Balanced AES/EBU gold plated XLR digital output

75 Ohm Coaxial gold plated RCA digital output

Optical Toslink digital output

Gold plated RCA analogue output connectors

Front CD loading draw

Full functioning display, time elapsed, time remaining on track and time remaining

on disc

Programme facility

Repeat function (1/All & A-B)

Random play

10 second intro play

New custom made, programmable learning system remote handset with back light

specifications

Operating System CD digital audio system (CD, CD-R, CD-RW)

Frequency Response 20Hz – 20kHz ± 0.2dB

Harmonic Distortion < 0.002% @ 0dB, 1kHz

< 0.006% @ -30dB, 1kHz

< 0.002% @ 0dB, 20Hz

< 0.008% @ 0dB, 20kHz

Intermodulation Distortion < 0.001% @ 0dB

S/N Ratio (IHF-A Wtd.) 105 dB

Wow & Flutter Quartz precision

Channel Separation 110 dB @ 1kHz

100 dB @ 20kHz

Output Voltage 2.2Vrms

Digital Outputs 75 Ohm Coaxial, RCA

110 Ohm Balanced AES/EBU, XLR

Optical, Toslink

D/A Conversion PCM1798 Advance Segment, Audio-Stereo DAC

Resolution/Sampling 24 bits / 192 kHz

Oscillation 3rd Overtone Oscillation

Crystal Super precision, custom made

Jitter <150 psec

Idle Pattern <-112 dB

Stop band Rejection <-95 dB

Power Supply high performance low noise toroidal transformer

7 fully regulated power rails

Power Source 100V – 120V 50Hz / 60Hz

220V – 240V 50Hz / 60Hz

Power Consumption < 15 W

Dimension 432 x 380 x 90 (W x D x H) mm

432 x 380 x 102 (including feet)

Weight 9Kg

roksan KANDY K2 LOUDSPEAKER TR-5

The Kandy K2 Loudspeaker is designed to perform. Its custom designed woofer and its dedicated ribbon tweeter encased in an aesthetically beautiful and solidly built piano lacquered cabinet provide a musical, dynamic and detailed 3-dimensional soundstage expected of much larger hi-end loudspeakers.

The K2 woofer is custom designed to ensure an extended and accurate bass from a relatively small cabinet. The dedicated ribbon tweeter provides an open, fast high frequency with clarity, extension and accuracy. Seamless integration of woofer and the tweeter ensure a delicate, full and powerful presentation of the music.

Features include high quality gold plated woofer and tweeter binding terminals to allow bi-wiring.

Features

130mm high power handling custom designed woofer

Custom designed treated & coated paper woofer cone

Cast woofer chassis for extra rigidity

High tolerance dedicated ribbon tweeter

Tweeter dispersion damping foam

Internally braced, double cavity 15 mm high quality MDF cabinet

High quality 2oz copper, double sided X-over PCB

Large, low impedance, air core X-over coils

5% tolerance metalised polyester X-over capacitors

High quality, gold plated bi-wireable speaker binding terminals

Fire retardant, high absorption internal acoustic damping foam

Tolerance matched compensation circuit components

SPECIFICATIONS

Tweeter High tolerance dedicated Ribbon

Woofer Custom designed, 130mm coated paper

Cast chassis with double magnets

Input Sensitivity (1W, 1m) >88 dB

Impedance >6Ω

Frequency response 39 Hz – 20 kHz (in room response)

55 Hz – 20kHz (-6dB)

Nominal Power Handling 60 Watts

Peak Power Handling 100 Watts

Dimensions 190 x 280 x 370 (W x D x H) mm

Weight 8.0 Kg