Onkyo TX-NR809 Network AV Receiver With Wharfedale Speaker Pack Two

Onkyo TX-NR809 Network AV Receiver With Wharfdale Speaker Pack Two

All speakers are supplied with speaker grill covers and in one finish, unless otherwise requested.

Onkyo TX-NR809 Network Av Receiver.

With its advanced processing and fabulous array of connections, the TX-NR809 is ready to lift the roof off. Eight HDMI® inputs handle all your high-def content, from master-quality audio to upscaled 4K video. Home network capability lets you bring streaming internet radio and PC audio to your living room. And the drop-down front panel conceals a plethora of one-touch audio controls and A/V inputs.

Video—whether standard or high definition—gets the royal treatment from a high-quality HQV® Vida™ processor and independent ISF calibration for each source. Advanced audio options include bi-amping, 7.2 multichannel pre-outs, and distributed multi-zone audio. As you’d expect from a receiver near the top of Onkyo’s mid-range line-up, construction is first-rate. A massive transformer, symmetrical L/R channels, separate power and pre-amp blocks, and a highly rigid chassis provide the bedrock for a superlative audio performance.

Built with the serious home cinema fan in mind, the TX-NR809 offers a class-leading mix of power, features,

Specification

Amplifier Section Power Output

Front L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)

Center 180 W (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)

Surround L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)

Surround Back L/R, Front High L/R, Front Wide L/R, or Zone 2 L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)

Dynamic Power 300 W (3 Ω, Front) 250 W (4 Ω, Front)

150 W (8 Ω, Front)

THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, Half power)

Damping Factor 60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance 200 mV/47 kΩ (Line)

2.5 mV/47 kΩ (Phono MM)

Rated RCA Output Level and Impedance 200 mV/470 Ω (Pre out)

Maximum RCA Output Level and Impedance 4.6 /470 Ω (Pre out)

Phono Overload 70 mV (MM, 1 kHz, 0.5%)

Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)

Tone Control ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 110 dB (Line, IHF-A)

80 dB (Phono MM, IHF-A)

Speaker Impedance 4 Ω–16 Ω or 6 Ω–16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

Video 1.0 Vp–p/75 Ω (Component and S-Video Y)

0.7 Vp–p/75 Ω (Component PB/CB, PR/CR)

0.25 Vp–p/75 Ω (S-Video C)

1.0 Vp–p/75 Ω (Composite)

Component Video Frequency Response 5 Hz–100 MHz/0 dB, -3 dB

Tuner Section

Tuning Frequency Range FM 87.5 MHz–108 MHz

AM 522 kHz–1,611 kHz 530 kHz–1,710 kHz

FM/AM Preset Memory 40 stations

General

Power Supply AC 220–240 V~, 50/60 Hz

Power Consumption 710 W

Dimensions (W x H x D) 435 x 198.5 x 435.5 mm

Weight 18.3 kg

CARTON

Dimensions (W x H x D) 587 x 337 x 553 mm

Weight 23.0 kg

Supplied Accessories

Indoor FM antenna • AM loop antenna • Speaker cable labels

Wharfedale Speaker Pack Two

Package Consists Of:

One pair of Wharfedale Diamond 10.4 front speakers

One pair of Wharfedale Diamond 10.1 rear speakers

One Wharfedale Diamond 10CS centre speaker

One Wharfedale SPC-10 subwoofer

For almost 30 years, Wharfedale’s famous Diamond speakers have served as the classic entry point to true high-fidelity sound, their exceptional value for money earning dozens of awards around the globe. Now, with the introduction of the all-new Diamond 10 Series, Wharfedale has again raised the bar for affordable, high-performance loudspeakers.

The latest evolution of this classic speaker range builds upon the success of its multi-award-winning predecessors with numerous enhancements. The result is a sound that’s crisp, focused and spacious, effortlessly dynamic yet firmly in control. Add the visual appeal of elegantly curved cabinets, enhanced by a choice of six perfectly formed finishes, and it is clear: the new Diamond 10 series is the sparkling jewel in Wharfedale’s crown.

for more information on wharfedale diamond 10 series speaker pack two click here