![]() |
![]() 274 Ringinglow Road, Sheffield, S11 7PX T: 0114 321 0440 E: info@a1-sound.co.uk |
![]() |
We accept:

![]() Onkyo Silver Finish |
![]() Vermont speaker finish |
![]() Onkyo Rear Panel |
![]() Authorised Dealer |
![]() Black 809 |
![]() Android Ready |
![]() Angled Black |
![]() Angled Silver 809 |
![]() 809 Remote Control |
There are no customer reviews for this product.
Submit a review for this product
![]() | This product is in stock |
Onkyo TX-NR809 Network AV Receiver With Acoustic Energy Neo V2 5.1 Cinema Pack
All speakers are supplied with grill covers.
Onkyo TX-NR809
With its advanced processing and fabulous array of connections, the TX-NR809 is ready to lift the roof off. Eight HDMI® inputs handle all your high-def content, from master-quality audio to upscaled 4K video. Home network capability lets you bring streaming internet radio and PC audio to your living room. And the drop-down front panel conceals a plethora of one-touch audio controls and A/V inputs.
Video—whether standard or high definition—gets the royal treatment from a high-quality HQV® Vida™ processor and independent ISF calibration for each source. Advanced audio options include bi-amping, 7.2 multichannel pre-outs, and distributed multi-zone audio. As you’d expect from a receiver near the top of Onkyo’s mid-range line-up, construction is first-rate. A massive transformer, symmetrical L/R channels, separate power and pre-amp blocks, and a highly rigid chassis provide the bedrock for a superlative audio performance.
Built with the serious home cinema fan in mind, the TX-NR809 offers a class-leading mix of power, features, and performance.
Specifications
Amplifier Section Power Output
Front L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)
Center 180 W (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)
Surround L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)
Surround Back L/R, Front High L/R, Front Wide L/R, or Zone 2 L/R 180 W/Ch (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)
Dynamic Power 300 W (3 Ω, Front) 250 W (4 Ω, Front)
150 W (8 Ω, Front)
THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, Half power)
Damping Factor 60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance 200 mV/47 kΩ (Line)
2.5 mV/47 kΩ (Phono MM)
Rated RCA Output Level and Impedance 200 mV/470 Ω (Pre out)
Maximum RCA Output Level and Impedance 4.6 /470 Ω (Pre out)
Phono Overload 70 mV (MM, 1 kHz, 0.5%)
Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode)
Tone Control ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 110 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A)
Speaker Impedance 4 Ω–16 Ω or 6 Ω–16 Ω
Video Section
Input Sensitivity/Output Level and Impedance
Video 1.0 Vp–p/75 Ω (Component and S-Video Y)
0.7 Vp–p/75 Ω (Component PB/CB, PR/CR)
0.25 Vp–p/75 Ω (S-Video C)
1.0 Vp–p/75 Ω (Composite)
Component Video Frequency Response 5 Hz–100 MHz/0 dB, -3 dB
Tuner Section
Tuning Frequency Range FM 87.5 MHz–108 MHz
AM 522 kHz–1,611 kHz 530 kHz–1,710 kHz
FM/AM Preset Memory 40 stations
General
Power Supply AC 220–240 V~, 50/60 Hz
Power Consumption 710 W
Dimensions (W x H x D) 435 x 198.5 x 435.5 mm
Weight 18.3 kg
CARTON
Dimensions (W x H x D) 587 x 337 x 553 mm
Weight 23.0 kg
Supplied Accessories
Indoor FM antenna • AM loop antenna • Speaker cable labels
for more information on the Onkyo TX-NR809 click here
Acoustic Energy Neo V2 5.1 Speaker package
The package consists of:
One pair of Acoustic Energy Neo 3 V2 floorstanding speakers
One pair of Acoustic Energy Neo 1 V2 rear speakers
One Acoustic Energy Neo V2 centre speaker
One Acoustic Energy Neo 8 V2 subwoofer
Acoustic Energy NEO 3 V2 floorstanding speakers
Specifications2.5 - way reflex loaded
HF Driver - 25mm Neodymium ring radiator
LF/MF Driver - 130mm pressed alloy cone
Cabinet - Braced 15mm MDF carcass
Freq response 43 Hz - 45kHz +/- 3dB
Freq range 35 Hz - 45kHz @ - 6dB
Power handling 170 watts RMS
Amp compatibility 25 - 150 watts into 8 Ohms
Nominal impedance - 8 Ohms
Sensitivity - 90dB
Dimensions - 905mm x 203mm x 242mm (HxWxD)
Weight - 14kg (single speaker unpacked)
Finishes - Black, Vermont
Acoustic Energy NEO 1 V2 bookshelf speakers
2 - way reflex loaded
HF Driver - 25mm Neodymium ring radiator
LF/MF Driver - 130mm pressed alloy cone
Cabinet - Braced 15mm MDF carcass
Freq response 60 Hz - 40kHz +/- 3dB
Freq range 45 Hz - 45kHz @ - 6dB
Power handling 120 watts RMS
Amp compatibility 25 - 150 watts into 8 Ohms
Nominal impedance - 8 Ohms
Sensitivity - 89dB
Dimensions - 357mm x 182mm x 231mm (HxWxD)
Weight - 6kg (single speaker unpacked)
Finishes - Black, Vermont
Acoustic Energy NeoV2 centre
The NeoV2 Centre is a slim, powerful 2.5-way centre loudspeaker for home cinema systems.
Perfect for medium to large rooms and recommended for use either on a dedicated stand or in a hifi rack (where it was acoustically designed to work). Based on the award winning Neo Centre, the 'NeoV2' model now boasts a host of improvements to ensure this class leading home cinema speaker retains its market status. Voice matched to the floorstanding NeoV2 Three, and stand mount NeoV2 One. Available in Black Ash or "Vermont" Walnut.
Specifications
Type: 2.5-Way Reflex-Loaded
HF Driver: 25mm Neodymium Ring Radiator
LF/MF Driver: 130mm Pressed Alloy Cone
LF/MF Magnet System: Neodymium
Filter Network: 1st Order at 200Hz, 3rd Order at 3.5kHz
Cabinet: Braced 15mm MDF Carcass
Frequency Response: 75Hz - 40kHz +/- 3dB
Frequency Range: 63Hz - 45kHz @ 6dB
Power Handling: 120 Watts RMS
Amplifier Compatibility: 25-150 Watts into 8 Ohms (Recommended)
Nominal Impedence: 8 Ohms
Sensitivity: 90dB for 1 Watt at 1 Metre
Dimensions: 178x 480x 195mm(HxWxD)
Weight: 9 kg (Single speaker, unpacked)
Acoustic Energy Neo V2 Subwoofer
The NeoV2 Sub is a compact yet powerful active subwoofer for music or movie systems.
Perfect for medium to large rooms and fully adjustable for seamless integration into any audio set-up. The NeoV2 Sub is widely regarded as one of the best compact & affordable subwoofers available. Available in Black Ash or "Vermont" Walnut.
Specifications
Type: Closed-box, active subwoofer
Driver: 220mm pulp cone with 48mm thermally bonded voice coil, High-power long-throw magnet system
Low Frequency Cut-off: -6dB @ 26Hz
Amplifier: 200 Watts into 8 Ohms
Low Pass Filter: Variable 2nd order, 45Hz to 150Hz
Phase: Variable 0 to 180
Notch Filter: Variable Frequency 40 to 100Hz, Q:1.5 to 5.0, Level: 0dB to -12dB
Dimensions: (HxWxD) 410 x 360 x 325 mm
Weight: 17kg (Single unpacked)
There are no related products.
There are no customer reviews for this product.
About A1 Sound | Privacy | How to Order | Delivery/Availability | Terms and Conditions | FAQs | Showroom Location | Bookmark this site
Copyright 2003-2012
A1 Sound, 274 Ringinglow Road, Sheffield, S11 7PX
0114 321 0440
Vat 873 4102 35
Website design by
Pocketsite Design, 2003-2012