Musical Fidelity V-LPS MK II Phono Stage.

Musical Fidelity V-LPS MK II Phono Stage.

V-LPS II

The V-LPS is a very high performance MM/MC Phono Stage. It is technically correct. It has virtually perfect RIAA (±0.3dB 20Hz - 20kHz), extremely low distortion, wide overload margin and very low noise. By every tehnical measure it is top quality.

We achieve this by putting our kW Series phono stage circuitry into a package which is extremely economical. It really isn't rocket science, all you have to do is to be determined to make incredible value for money. And that's the V-LPS!

Connections

All connections must be made before the

mains adaptor is plugged in, and before any

amplifier connected is switched on. Always

switch off the equipment attached to the VLPSII

before connecting/disconnecting

power, changing leads or inputs.

Inputs

Using good quality RCA leads (not

supplied), connect the left and right turntable

outputs to the correct V-LPSII INPUT

sockets.

Use the phono MM input for moving magnet

cartridges. Make sure MM/MC switch is

OUT.

Use the phono MC input for moving coil

cartridges. Make sure MM/MC switch is IN.

An earthing terminal is provided. Connect

earth wire from turntable to this terminal if

hum is apparent. Other setups may work fine

with this terminal left disconnected and no

harm is done in doing so.

Outputs

Connect the V-LPSII left and right

OUTPUTS to the desired LINE LEVEL (e.g

AUX) inputs of the amplifier system.

Power

Plug the DC connector lead from the power

supply unit into the V-LPSII power inlet

socket, and plug the adaptor itself into a

convenient wall mains outlet. The blue LED

will light to confirm the unit is ready for use.

Use

Turn the volume on amplifier to normal

listening levels, sit back and enjoy the music.

These products have been designed so that

it may be left on indefinitely, but please note

that the mains adapter may become warm to

the touch - this is normal.