Harman Kardon AVR 460 AV Reciever

Harman Kardon AVR 460 AV Reciever

The Harman Kardon® AVR 460 features a high-definition user interface for seamless access to, and control of, all audio/video content. Built-in Dolby Volume maintains a constant volume level, regardless of changes when switching channels or sources. Multizone audio is achieved

with a Zone II remote control and A-BUS® multiroom connectivity, while EzSet/EQ technology ensures simple system setup.

Key Specifications

Audio Section – Continuous Average Power (FTC), (stereo mode): 75 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (seven-channel surround mode): 140 watts per channel into 6 ohms @ 1kHz, <1% THD, one channel driven; 60 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven; High Instantaneous Current Capability (HCC): ±35 amps

Tuner – Usable Sensitivity: IHF 1.3μV/13.2dBf; THD at 1kHz with 100% modulation, (mono): 0.2%; (stereo): 0.3%; FM Adjacent Channel Selectivity: ±400kHz, 70dB; Ultimate (maximum) S/N Ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB

Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 13.5kg

Highlights

Dolby® TrueHD decoding

Logic 7® (5.1 and 7.1) processing

Dolby Volume technology

DTS-HD Master Audio™ decoding

HDMI™ repeater with 1080p upscaling

Faroudja DCDi Cinema™ video processing

EzSet/EQ™ equalization

Ready for iPod and iPhone

HDTV-ready

Component video inputs

Compressed music tools

Quadruple-crossover bass manager

Multiroom audio

High-current capability

192kHz/24-Bit DACs

Features

Power:

140W x 7 into 6 ohms, 1kHz, at <0.1% THD, one channel driven

60W x 7 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously

High-current (±35 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design

Surround Processing

Full suite of Dolby surround decoding, including Dolby TrueHD and Dolby Digital Plus using an advanced Cirrus Logic®

CS 49700 32-bit DSP processor

Dolby Volume technology

Full suite of DTS® modes, including DTS-HD,™ DTS-HD Master Audio, DTS-ES® 6.1 Discrete & Matrix, DTS Neo:6® and DTS 96/24™

Dolby Pro Logic® IIx (Movie, Music and Game modes) surround sound

Harman-exclusive Logic 7 Movie, Music and Game surround sound processing in 5.1 and 7.1 channels

Headphone and Virtual Speaker surround modes

Five- and seven-channel Stereo, Hall and Theater surround

modes

192kHz/24-Bit DACs

Compressed music tools improve playback quality of any

compressed audio stream

Connectivity

Four HDMI inputs and one HDMI output with 12-bit Deep Color and xvYCC pass-through

Three assignable, wide-bandwidth (50MHz), HDTV-ready

component video inputs and one output

Connects to the Harman Kardon-engineered The Bridge III

docking station for playback, control and charging of iPod and iPhone

Subwoofer output for direct connection to a powered subwoofer

Four A/V inputs, plus two audio-only inputs

Eight-channel-direct inputs for use with external surround

decoders

7.1 Preamp outputs allow the use of external amplifiers

Convenient front-panel audio/video input for use with video games or portable players

Seven digital inputs (two optical and three coaxial on rear panel, and one optical and one coaxial on front panel)

One coaxial digital output on rear panel

USB port for firmware upgrades

IR remote extension jacks for control of the amplifier when

placed in a cabinet

Zone II and A-BUS multiroom audio outputs

Ease of Use

HDMI with audio processing and Faroudja DCDi Cinema video processing with upscaling to 1080p

Adjustable A/V Sync Delay

EzSet/EQ equalization for quick and accurate system setup

FM stereo/AM tuner with 30 presets and direct-access tuning

Quadruple-crossover bass manager

Wide range of low-frequency crossover points (40Hz, 60Hz,

80Hz, 100Hz, 120Hz and 200Hz) available

Full-color, high-definition, graphical on-screen interface,

including HDMI and component video

Programmable power-up volume

A-BUS/READY™ multiroom audio with Zone II remote control

Surround back amplifier channels configurable for use as

second-zone amplification

Detachable IEC power cord

Eight-device, backlit, preprogrammed and learning-system

remote control